Nouf's side aspect

Cross section update (Damato)

This is an update to my first cross-section. Without a few details (chairs and desks ect.) this will be the sixth floor of my building . 

Leong Finished cross section

It isn't pretty but i got it done. I also need to note that the scale for the cross section is different from the exterior aspects of the building. The exterior uses 10 feet to an eighth of an inch while the cross sections use 5 feet to an eighth of an inch. 

Dumbbell Building (Connor Hall)

Dempsey sketch

Elaborate window design for one of my buildings 

Two of Nouf's aspects - Window details

The south side of the tower although not complete it will be complete tonight

Dumbbell Building Start of the Third Aspect (Connor Hall)

Dempsey building interior

Bryan dempsey new aspect

This is the aspect from the south side of my building 

The west side of my lighthouse

East side aspect

This is the east side of my skyscraper. The middle of my building is open on all sides.

North side of awesome building

The north side of the building has a different design then the other sides it is not completely finished but when it is it will be mind blowing 

First cross-section

This is an extremely rough draft of the first cross-section of my building. The sixth floor, as seen above, is full of office rooms. My next cross-section will be of the upper levels where pent houses will be located. 

Lamond post

The city where I want my skyscraper- NYC

Drafting skyscrapers

Cylindrical Skyscraper

This is the front facing aspect of my Cylindrical Skyscraper. Standing at 3,456 feet tall, it would be the tallest skyscraper in existence. Each section of the building is approximately 691 feet tall. The base of the building is 720 feet wide. The purpose of this absolutely emense building would be to help solve overcrowding of prisons in the United States. Yes, a skyscraper prison. I used Mr. Fords number and letter drawing set to draw nice and neat numbers. 

Leong post 4

This is the southern face of the building im doing. The heights are supposed to be the same but on the drawings they are a little off but there you go...

North elevation

First draft of North elevation. I am interested in how reflectivity of façade will influence appearance of the skyscraper, and if extruding cones negatively impact the aesthetic of the silhouette.  

Leong aspect 3 (west face)

So... Since i need to specify what city and what company runs this thing, its in New York, and is the langham hotel (they exist.. They are a london based group that actually has a hotel in NYC). Somewhat better quality picture this time...

South side if my light house-DOMINIC

Dumbbell Building (Connor Hall)

Cylindrical Skyscraper

This is a rough sketch of my cindrical skyscraper. Each step of the skyscraper is actually at an angle, that way it doesn't look like a wedding cake. Mr. Ford and I used the projector to trace ovals, as we didn't have an oval the correct size to trace. 

1221 ft light house.

This is the western side of my light house with the fans facing the water. 

P

World trade three

Nouf's 4 aspects

Aspect and Cross Section Update

Here are two aspects and a cross section of my in progress skyscraper. I have all four (N,S,E,W) aspects done, but due to redundancy I felt it was only necessary to post two of them. The Cross section is a sketch of the sixth flour. Furniture, Elevators and Stair-wells will be marked soon. In the future I will also have a cross section of the upper levels floors and there floor plans.

Lamond velum

Another side of velum 

Lamond-Velum

This is the first side of my velum sketch. Still not complete but the basics are there

Dumbbell Building, First Side (Connor Hall)

Updated skyscraper

Michael Leong aspect 2

The picture quality looks like it was taken with a potato... This is the northern face of the building im doing. Added solar panels on the roof as well as a skylight. This is meant to be a hotel....

Dumbbell Skyscrapper (Connor Hall)